New Horizon turntable with an Ortofon 2M Bronze, photographed during the measurement session.

Groove Scope measurement · GS-2026-0012

Ortofon 2M Bronze

New Horizon

Groove Scope Studio traced how the speed pattern evolved over eight turns. The cartridge was measured as found, with no azimuth adjustment or other tuning.

Measured

Measurement at a glance

The primary record

These values describe the playback chain as found. They come from the original Groove Scope PDF.

Playback RPM
33.41
Under stylus load
Speed error
+0.23%
vs 33⅓ RPM
DIN-shaped W&F
0.053%
RMS
Channel balance
−0.47 dB
L−R
Avg separation
23.6 dB
1 kHz electrical crosstalk

Rotation fingerprints

Four dimensions, two channels

Each view pairs Groove Scope’s angular heatmap with its robust median profile. Choose L or R on each card. Channel assignments follow the supplied filenames.

Speed deviation

Left-channel speed-deviation rotation fingerprint and robust median profile.

Left channel selected

Harmonic distortion

Left-channel harmonic-distortion rotation fingerprint and robust median profile.

Left channel selected

Opposite-channel leakage

Left-channel opposite-channel leakage rotation fingerprint and robust median profile.

Left channel selected

1 kHz level modulation

Left-channel 1 kHz level-modulation rotation fingerprint and robust median profile.

Left channel selected

Both channels show eight revolutions (R1–R8), using each plot’s own angular reference. On smaller screens, swipe horizontally to browse all four plots.

Rotational behaviour

A speed pattern that shifts over eight turns

Both plots show slower and faster portions of the revolution. The shape and relative angle of those regions change across successive turns. That changing pattern is the standout feature of this capture.

Playback averaged 33.41 RPM, 0.23% above nominal, with 0.053% DIN-shaped wow and flutter RMS. The fingerprints show how the speed varied within each turn and how that pattern evolved. They leave the mechanical source and audibility of the variation open.

Azimuth and tracking

Channel asymmetry in the as-found setup

The report shows higher THD on the left (1.13% versus 0.80%) and more leakage from left to right (−22.2 dB versus −24.9 dB in the reverse direction). The measurer observed a visibly tilted cartridge body, reported a difference in treble response between channels and recorded a failed 70 µm tracking test. The supplied report and fingerprints cover a 1 kHz reference check. A frequency sweep would document the treble observation.

Ortofon specifies 80 µm tracking ability at 315 Hz and recommends 1.5 g tracking force. With the test conditions unrecorded and no azimuth adjustment made, setup and a possible cartridge or stylus issue both remain open. Ortofon 2M Bronze specifications ↗

Measurement chain

The playback system

The report identifies New Horizon, Ortofon 2M Bronze and ART. The turntable model, tonearm, ART model and capture input remain unrecorded.

Turntable
New Horizon
Cartridge
Ortofon 2M Bronze
Preamplifier
ART preamp

Open technical record

Behind the playback chain

The editorial review connects directly to the source report, structured record, checksums, measurement method and original asset archive.

Measurement results

The complete capture, in numbers

The table preserves the report’s figures for playback speed, weighted and unweighted stability, channel behaviour and harmonic distortion.

MetricMeasured result
Playback speed under stylus load33.41 RPM
Playback speed error+0.23% vs 33⅓ RPM
Settled speed range33.28–33.54 RPM
Settled speed span0.26 RPM
DIN-shaped wow & flutter RMS0.053%
Raw speed variation RMS±0.209%
Raw speed variation, 2-sigma±0.417%
Raw wow RMS0.201%
Raw flutter RMS0.054%
Channel balance, L−R−0.47 dB
Average channel separation at 1 kHz23.6 dB
Electrical crosstalk, L→R−22.2 dB
Electrical crosstalk, R→L−24.9 dB
Crosstalk balance / directional difference2.64 dB
Total harmonic distortionLeft 1.13%, right 0.80%
THD difference, L−R+0.33 percentage points (source report)
Second harmonic (H2)Left −39.0 dB, right −42.0 dB
Third harmonic (H3)Left −61.6 dB, right −64.3 dB
Fourth harmonic (H4)Left −66.9 dB, right −67.1 dB
Fifth harmonic (H5)Left −73.7 dB, right −72.4 dB
H2 difference summaryLeft 3.0 dB higher (source report)
H3 difference summaryLeft 2.7 dB higher (source report)
Harmonic reliabilityLeft H3 changed most during the recording. The report calls for a repeat before changing the cartridge setup.

The directional crosstalk difference retains the report’s precision and may differ from subtraction of the rounded channel values.