Rega Carbon cartridge on the Rega Planar 1 at the AudioReview laboratory, with ImageGen retouching.

Groove Scope measurement · GS-2026-0013

Rega Carbon

Rega P1

The cartridge looked square in the headshell. A test tone exposed a 10.27 dB gap between the two directions of leakage. At the AudioReview lab, two setup changes showed how much this entry-level pairing had in reserve.

Measured
Location
AudioReview laboratory

On the AudioReview bench

What the eye missed

Michelangelo Canonico measured the Rega for Direct Sound Records. Thanks to Mauro Neri, director of AudioReview, for making the laboratory session possible.

01 · Azimuth with Groove Scope

The leakage gap narrowed

10.27 dBto1.16 dB

Viewed head-on, the Carbon appeared aligned. Groove Scope measured how much of a 1 kHz tone crossed into the opposite channel in each direction. As found, far more of the right channel leaked into the left than the other way around.

With azimuth adjusted, right-to-left leakage dropped by 7.7 dB while left-to-right leakage rose by 1.3 dB. Average separation improved from 28.6 to 31.8 dB. The left channel’s output advantage edged up to +1.04 dB.

02 · Trackability with Groove Scope Studio

What half a gram unlocked

60 µmto80 µm

In a separate tracking trial, the Carbon reached 60 µm at 2.0 g. At 2.5 g it reached 80 µm, one-third more groove modulation on this test.

Both settings fall within the Carbon’s specified 2–3 g range. The 80 µm result describes this cartridge and test session. Rega Carbon specifications ↗

1 kHz measurementAs foundAdjusted
Crosstalk L→R−33.7 dB−32.4 dB
Crosstalk R→L−23.5 dB−31.2 dB
Directional gap10.27 dB1.16 dB
Average separation28.6 dB31.8 dB
Signal balance L−R+0.77 dB+1.04 dB

The as-found readings and tracking trial come from the measurer’s bench notes. The adjusted figures come from the original 1 kHz report. The tracking force used for that reference capture was unrecorded.

Measurement at a glance

The adjusted reference capture

Playback averaged 33.22 RPM under stylus load. The report measures DIN-shaped wow and flutter at 0.036% RMS.

Playback RPM
33.22
Under stylus load
Speed error
−0.35%
vs 33⅓ RPM
DIN-shaped W&F
0.036%
RMS
Channel balance
+1.04 dB
L−R
Avg separation
31.8 dB
1 kHz electrical crosstalk

Rotation fingerprints

Four dimensions, two channels

Each view pairs Groove Scope’s angular heatmap with its robust median profile. Choose L or R on each card. Channel assignments follow the supplied filenames.

Speed deviation

Left-channel speed-deviation rotation fingerprint and robust median profile.

Left channel selected

Harmonic distortion

Left-channel harmonic-distortion rotation fingerprint and robust median profile.

Left channel selected

Opposite-channel leakage

Left-channel opposite-channel leakage rotation fingerprint and robust median profile.

Left channel selected

1 kHz level modulation

Left-channel 1 kHz level-modulation rotation fingerprint and robust median profile.

Left channel selected

Both speed profiles dip near the middle of the displayed turn and rise again toward the end across eight revolutions. Right-channel distortion runs higher on the shared scale, consistent with 1.95% right and 1.36% left THD in the report. Each plot uses its own relative angular reference. On smaller screens, swipe to browse all four plots.

Measurement chain

The playback system

The capture input appears as USB Audio CODEC in the report. The exact ART model and tonearm model remain unrecorded.

Turntable
Rega P1
Cartridge
Rega Carbon
Phono preamplifier
ART preamp

Open technical record

Behind the playback chain

The editorial review connects directly to the source report, structured record, checksums, measurement method and original asset archive.

Measurement results

The complete capture, in numbers

The table preserves the report’s figures for playback speed, weighted and unweighted stability, channel behaviour and harmonic distortion.

MetricMeasured result
Playback speed under stylus load33.22 RPM
Playback speed error−0.35% vs 33⅓ RPM
Settled speed range33.11–33.31 RPM
Settled speed span0.20 RPM
DIN-shaped wow & flutter RMS0.036%
Raw speed variation, unweighted RMS±0.176%
Raw speed variation, unweighted 2-sigma±0.352%
Raw wow, unweighted RMS0.171%
Raw flutter, unweighted RMS0.037%
Channel balance, L−R+1.04 dB
Average channel separation at 1 kHz31.8 dB
Electrical crosstalk, L→R−32.4 dB
Electrical crosstalk, R→L−31.2 dB
Directional crosstalk difference1.16 dB
Total harmonic distortionLeft 1.36%, right 1.95%
THD difference, L−R−0.59 percentage points
Second harmonic (H2)Left −37.4 dB, right −34.3 dB
Third harmonic (H3)Left −63.4 dB, right −53.0 dB
Fourth harmonic (H4)Left −64.1 dB, right −56.7 dB
Fifth harmonic (H5)Left −72.4 dB, right −65.8 dB
H2 difference summaryRight 3.1 dB higher
H3 difference summaryRight 10.3 dB higher
Harmonic reliabilitySteady during recording and suitable for setup guidance, per the report

The directional crosstalk difference retains the report’s precision and may differ from subtraction of the rounded channel values.